SMV2-224 and ConAV
ConnAV Rack Unit
ConnAV Rack Unit Back
SMV2-224 and ConAV
ConnAV Rack Unit
ConnAV Rack Unit Back

APT-GB ConnAV

€ 2.495,00

APT-GB ConnAV

  • Audio signals can be sent in or taken out of the video streams in 3 pin XLR to allow easy connection to audio systems
  • The unit is fitted with Neutrik powerCON TRUE1 input and output, allowing easy connection on Stage to Power and Signal sources
  • Plus all built within a standard touring grade unit ready for the road anywhere in the world , as unit will run from 90-260v and 50/60Hz
  • Convert and route Signals from Network video, NDI, HDMI & SDI inputs to Network video, NDI, HDMI & SDI Outputs
  • Playback & recording to internal SSD or External USB Stick
  • Supports up to 4k30 Resolutions, SDI 3g up to 1080P60
  • Support for all common network video protocols, RTSP, RTMP, HTTP, HLS, UDP, Unicast, Multicast, ONVIF, SRT, NDI®|HX
  • Built in 1 gbps 4 port Switch + wifi 6
  • Built in Web UI for Configuration Changes, Tailscale secure remote access service for support (Requires Internet access, and free user account set up to enable service)

Verfügbar bei Nachbestellung

Artikelnummer: ConnAV Kategorie: Schlagwörter: , , , , , , , , , , , , ,

Beschreibung

  • Expanding on the new SMV2 Autocue, Teleprompter range this 1u Rack Unit covers all your Autocue, Teleprompter and Audio Distribution needs. Encodes and Decodes multiple video formats out of the box, utilising the same software and hardware as the SMV224 & SMV212 products keeping a nice streamlined solution to the range
  • All features and setup are done by a web browser interface and can be exported off the device, allowing backup and device swapping, while retaining important settings
  • Units are fitted with a small OLED screen that show info about the unit (ie IP address, input and resources usage)
  • Audio signals can be sent in or taken out of the video streams in 3 pin XLR to allow easy connection to audio systems
  • The unit is fitted with Neutrik powerCON TRUE1 input and output, allowing easy connection on Stage to Power and Signal sources
  • Plus all built within a standard touring grade unit ready for the road anywhere in the world , as unit will run from 90-260v and 50/60Hz
  • Convert and route Signals from Network video, NDI, HDMI & SDI inputs to Network video, NDI, HDMI & SDI Outputs
  • Playback & recording to internal SSD or External USB Stick
  • Supports up to 4k30 Resolutions, SDI 3g up to 1080P60
  • Support for all common network video protocols, RTSP, RTMP, HTTP, HLS, UDP, Unicast, Multicast, ONVIF, SRT, NDI®|HX
  • Built in 1 gbps 4 port Switch + wifi 6
  • Built in Web UI for Configuration Changes, Tailscale secure remote access service for support (Requires Internet access, and free user account set up to enable service)

    Download hier alle APT-GB ConnAV Specificaties

Zusätzliche Informationen

Gewicht 10 kg
Größe 25 × 55 × 50 cm

Rezensionen

Es gibt noch keine Rezensionen.

Schreibe die erste Rezension für „APT-GB ConnAV“

Ähnliche Produkte

OBEN